14x6J 4/100 Haven ET35 BKMF Wheels (Set of 4)
Sold Out
  • SKU: 82420458
  • Availability: Out of stock

14x6J 4/100 Haven ET35 BKMF Wheels (Set of 4)

R 4,800.00

    Haven BKMF Black Machined Face

    Fitment tips
      • Test fitment of your new rims to vehicle first, before fitting the tyre.
      • Test PCD (Pitch Circle Diameter) centre bore offset and x-factor clearance.
      • If the rim does not fit first time to hub, do not force on. May be the wrong PCD.
      • Ensure correct nuts or bolts are being used. A minimum of 5 full revolutions of the nut or bolt must be attained.
      • If wheel nuts/bolts do not fit smoothly up to torque, do not force tighten. If force is used, the bolt/nut may be incorrect and may strip the thread.
      • Check if centre ring (spigot) is required. The spigot will centre the rim onto the hub, ensuring far greater wheel/tyre balance.
      • Once fitted, spin wheel & tyre combo before lowering vehicle. This will ensure that the rim/tyre is centered correctly.
      • Torque wheel bolts/nuts to manufacturers specifications in correct sequence. This will ensure correct torque around the entire contact area.
      • Ensure that you use the correct wheel spanner fitment.
      • Re-torque wheel bolts/nuts 100 km - 500 km after fitment of new rims.